Handlebar end mirror FERRARA 2 for Vespa, left or right, chrome

If you don't like the original mirrors, you can buy these Bar end mirror Ferrara 2 swap. Due to the mostly narrow design, the overall width of the handlebar is not significantly widened, and getting through in traffic jams or city traffic is still not a problem. The mirrors can be mounted either downwards or upwards. When mounted downwards, the field of vision to the rear is slightly better. A mounting kit (see recommendation) is required for attachment.

• 122x85mm
• Aluminium
• schrom
• Lever length 115 mm
• E-mark on glass
• usable for left or right page

Mounting instructions for Vespa GTS/GTS Super/GTV/GT 60/GT/GT L: A mounting kit is required to mount the handlebar end mirror. This serves as a handlebar extension and is available for installation with or without handlebar end weights. (Item no. MV502950/ MV502952/ MV502953)

Assembly instructions for Vespa ET/LX/LXV/S: For assembly, you need a handle with a "bar end opening" or cut open the original one. The mounting kit (item no. MV502952 / MV502953) can be used with closed handlebars, and the handlebar end weights (item no. MV161030 / MV161031) are required for open handlebars.

Tip: To close the original handlebar mirror mount, use the cover cappe (item no .40093110)